The California ISO has revised the operating procedure referenced below.
1510 Pre-schedule and Check-out Validation, version 6.2, effective Oct. 12, 2023.
Updated Transmission Desk to Transmission Dispatcher. Section 3.1: Added details for E-Tag (Electronic tag) auto adjustments after Day-Ahead (DA) Market publishes, timing, and clarification if DA Market publishes late.
2210Z Effectiveness Factors - All, version 28.7, effective Oct. 12, 2023.
- 7320: Added note regarding Control Point (CP) #27 included in 7340 since it requires Silicon Valley Power mitigation for alleviating overloads. Updated to version 15.3, effective 10/12/23
- 7430: Update to Table 3 Gen effectiveness for new CP #27.
- Updated version and date only for the following:
- 6310: version 24.6, effective 10/05/23
- 6410: version 10.6, effective 9/26/23
- 6610: version 15.6, effective 9/26/23
- 7110: version 13.2, effective 9/14/23
- 7230: version 15.3, effective 10/12/23
- 7410: version 9.2, effective 9/15/23
- 7630: version 16.3, effective 9/26/23
3140A TOP-003 TOP - BA Data Request and Specifications for Data Provision, version 6.2, effective Oct. 12, 2023.
Updated data request 6.8.2 from discussions with Data Exchange Working Group (DEWG) on 9/13/23 and Joint Cold Weather Task Force, per North American Electric Reliability Corporation (NERC) Alert 3, and email for data request from New Resource Implementation (NRI) to Resource Data Template (RDT) team. Added a note to 6.2.8 In accordance with Full Network Model Schedule posted RC Portal > Western Interconnection Model library for new resources. Updated data requests 1.13, 6.10.1, and 6.10.2 in preparation of Federal Energy Regulatory Commission (FERC) Order 881 on dynamic ratings. Added request 2.24 based on feedback regarding battery storage Inter-Control Center Communications Protocol (ICCP) data. Minor punctuation edits on Exceptions tab.
The California ISO’s operating procedures are available on the Operating Procedures webpage.
